Articus Studio

MetalSmithing Tools, Bench Block Pads, Saw Frames, Mandrels,

Articus Studio Home Page
Return Policy
Art Sticker Books
Art Molds - Flexible
Art Metals
Arful Gathering Online Art Retreat
Beading Thread-SoNo & Super Lon
Beading Wire, Wire Curling Tools, Coiling Gizmo, Wire Info
7 Gypsies Binderie & Paper Products, Ephemera Packs
7 Gypsies Rubber Stamps, Transparencies, Rubbings & More
7 Gypsies - Color Rubbings-Rub-ons
Bookbinding, Book Making Supplies
Bookbinding, Book Making & Paper Craft Tools
Bookbinding Supplies, Linen Binding Tapes
Bookbinding Supplies-Needle, Thread
Bookbinding - Book Making Terms
Bottle Caps, Bottle Cap Technique Books, Stickers
Brass Charms-Birds, Butterflies, Bees & Dragonflys
Brass Charms - Blank Tags & Discs
Brass Charms - Coffee & Tea
Brass Charms-Cross
Brass Charms - Crowns
Brass Charm Embellishments
Brass Charm Embellishments 2
Brass Charms - Eyeglass Frames
Brass Charm Fancy Connectors
Brass Charms - Fleur de Lis
Brass Charms - Flowers, Leaves & Pumpkins
Brass Charm Frames
Brass Charms - Gears Steampunk Look
Brass Charms - Keys & Locks
Brass Charms-Ornate Ornamentals
Brass Charms - Sewing & Scissors
Brass Charms- Travel Embellishments
Brass Charms - Womens Accessories
Brass Charms - Words
Brass Charms - How to Add Patina
Brass Charms 101 - Cleaning, Painting,Sealing
Brass Stencils
Classy Corner Protectors
Classy Box Corners & Protectors
Crystal Rhinestone Pizazz
Create Recklessly with Artist Concrete
Tim Holtz Ideology Products & Cool Tools
Tim Holtz Alcohol Inks by Ranger Ink
Tim Holtz Alcohol Inks-Lights & Brights Colors by Ranger Ink
Domino Art Beads, Acrylic Buttons & Glass Look Rectangles
Embellishments in Metal
Embellishments-Oriental or Asian
Embossing Folders-Pretty
Frozen Charlotte Dolls - NOT!
Glues, Adhesives, Dimensional Glaze
High Tack Double Sided Tape--X-press It
Hammers are cool! for Jewelry, Metal Smithing
Hinges & Hook Latches
Inks-India Ink, Staz On, Pilot Metalllic Markers
Jewelry Making Findings
Jewelry~Glass Tile Pendants
Jewelry Findings-Pin Converters
Jewelry Findings - Bails
Jewelry - Nunn Design Patera Pendants & Findings
Jewelry~ Nunn Design Rings
Jewelry Findings-Katiedids Creative Components
Jewelry Findings-Wire, Headpins & More by Beadalon
Jewelry Findings - Pin Backs with Bails
Jewelry Findings - Screw Eyes
Jewelry Findings-Shaped Jump Rings
Jewelry Making Supplies Assorted
Jewelry Making Supplies- Fillable Pendants & Lockets
Jewelry Making Tools- Pliers,Metal Stamp Sets & More
Keys & Keyhole Embellishments
Metal Foil Tapes
Metal Foil Tapes "How To" Video
Metal Patinas & Glaze by Vintaj & Ranger
MetalSmithing Tools for Light Metal Smithing
Metal Smithing Vintaj Deco Etch & DecoEmboss Dies
Metal Monopoly Cars
Metal Nail Head Rivets & Escutcheon Nails
Metal Hole Punch Pliers
Mica Tiles
Microscope Slide ART Holders
Miscellaneous Cool Stuff
Muslin Dolls & Poseable Bendy Dolls
Non-Stick Teflon Craft Sheet
Manila Paper Tags, Mail Art Tags
Peerless Water Colors & Metallic Glazes & Pearl Ex CD
Puzzle Pieces
Stampbord Stamping Surface
Stampers Anonymous Artful Rubber Stamps
Stickers & Collage Items
Stenciling Stencils
Templates for Triptychs, Envelopes, Stationery Boxes & More
TerrificallyTacky Tape
Unmounted Rubber Stamps-Alphabet & Words & Misc
UM Rubber Stamps - Oriental
Unmounted Rubber Stamps - Floral
Wonderful Washi Tape
Glues and Adhesives Guide
Stamp Pads 101
Beaded Jewelry- How To Care For It
Everything You Always Wanted to Know About Paper
Ordering,& Shipping Info Shipping Delays
International Shipping
Return Policy
Customer Gallery of Inspiration
Artists Trading Cards (ATC's) - Book, Cards and History
Facebook
Idea Gallery
Stampbord Gallery
Christmas Gallery
Gary Burlin Stamping With Style Weekend Samples
ATC's Gallery
Gift Certificate
About Us
Links of Interest
Shopping Cart Info

It has probably been about 7 years or more since I took a 6 week metal smithing class.  I live about 40 minutes from Columbus, Ohio and they have a wonderful place downtown that offers classes is a variety of subjects, The Columbus Cultural Arts Center.  I really enjoyed the class and I got to use cool tools like torches, saws, pickling pots and so on.  The torch thing is a little intimidating at first.  But I became more comfortable with it.  I think what this class did more than anything else was allow me to think of the possibility of dabbling with metals.  I learned how to use the jeweler's saw (shown below) and make precise cuts from metal using metal sheeting.  I mostly used brass and copper.  It really was quite an easy thing to do.  You don't need a lot of tools to do some creative things with metal.  I try to play with metals without using heat and more involved processes.  I like using spoons to play with.  Here is a picture below of what I did with a spoon, hammer, adhesive, charms from Articus Studio.  I consider myself a jack-of-all-trades and master of none.  I love learning about all sorts of techniques and things but Articus demands more time than I can devote to really perfecting and learning all there is about certain techniques.  So if you think you would like to delve into some metal- jump right in.  If you find you really like it- you can devote more time and money investing in tools to help you explore this wonderful medium. 

spoon2use.jpg
Corrine's Spoon Pendant

This picture is 3d so the scanner tends to blur the things not closest to the glass.  I have worn this quite often on a necklace wire and received many compliments. 

sawframeuse.jpg

 
 
 
 
 
German Style Saw Frame~ This is a jewelers saw- looks intimidating, but it really is not.  It can open up a whole new world for you in metals.  It is essential for cutting a precise shape of metal.  There are many books and information out there as to how to use one- I will try to add a little on this page for that.  You also need blades for it and they are sold below.
$12.95

sawbladesuse.jpg

Herkules 2/0 White Label Sawblades~These are the kind of blades that fit into the jewelers saw above.  This particular size is a bit of a generic blade, this size being used more frequently than most others.  It is recommended 14 gauge metal and books recommend it for 20 and 22 gauge metal too.    The blade sizes are based primarily on the number of teeth per inch.  The more teeth per inch-the finer and cleaner cut you will be able to make.  Coarser blades will cut faster but it will be a less clean cut.  Not to worry- we have the file sets to smooth any coarse areas. 
To load this into your saw-
1.  Hold the jewelry saw facing you- this is the part that has the knobbies you loosen/tighten facing you.
2.  Insert the blade so that the teeth face the floor, angled away from the frame part- the silver part. 
3.  Insert the blade into the top by unscrewing the top wing or thumbscrew, insert the blade and tighten the screw.  The saw blades are fairly delicate and they should be taut in your frame when you are sawing.  A loose blade will make sawing more difficult and will probably break or buckle if it is loose.  You will get the hang of this this pretty easy.
4.  Insert the bottom part of the saw blade by unscrewing the thumbscrew at the bottom of the frame.  Insert the blade-remember it must be taut- maybe even play a little music on it.  Tighten the screw.
These saw do not come with written instructions so you can refer back to this page or pick up a couple books on it that I recommend at the bottom of the page.
Sold per package of 12 blades- 1 dozen.
$2.75

beadfilesetuse.jpg

10 Piece Needle File Set~The big bonus to this set is the little handles that come with it.  I think needle files are a must have whether you are working a little or alot in metal.  Even using the brass charms, if I remove a ring from the top of the charm, it is nice to have these on hand to file that smooth.  You can also add some texture to a flat piece of metal but running the files over it.  These are all different shapes to fit all kinds of shapes of metal- the set includes 2 round, 2 triangle, 1 knife shape, 1 half-round, 1 square, 1 oval, 2 flat (1 blunt & 1 tapered).  You can also use them to shape and detail polymer clay and PMC metals before and after firing.  Their size also makes them ideal for getting into confined spaces.  The files are made of high-grade steel and set into the 2 x 1/2" handles.  The tool length is approx. 6".  It is important to keep your files clean so they perform at their best for you.  If you notice bits of metal debris clogging the teeth, clean them by pulling a wire brush across the surface of the file in the same direction as the "cuts".  The file teeth on your file are formed by making many small cross-hatch "cuts" in the steel creating small teeth between the intersectioin.  A good file will last forever if you take care of it.  Think of your tools as an investment.  One of the best things I ever bought was a red Craftsmen tool storage unit from Sears.  I know where my tools are-I can't find the other things to use the tools on- but I know where the tools are.
$4.95

Need a hammer to add texture to your metal- you can find it on this page link for jewelry making tools & hammers

mandreluse.jpg

Beadsmith Multi Mandrel Set~Cool looking huh.  Think of it as a flashlight handle and you can put 4 different interchangeable tops on it.  Very clever.  This is a tool for the wire wrapper in you that just wants to wrap everything in sight.  Or you could hold it in your hand and make up a rapping song about wire wrapping..oh well, just one of those days-it could be the faux microphone.  Send me a pic.
To use: 
1.  Select the shape you want to use- round or circle, oval, square or triangle.  Insert it into the handle. 
2.  Select the size you want.  The triangle shape has 10 graduated levels to choose and the other shapes have 12 graduated levels.  Then secure the wire at the desired level.
3.  Just begin to wrap the wire, pulling it tightly as you wrap it around the mandrel.  You can add beads, ribbons, etc.- to incorporate these items, remove the wire, add the item then return it back to the mandrel and resume wrapping.
4.  Continue wrapping the wire on the mandrel until you have what you want for your piece.
5.  To finish, remove the shaped wire from the mandrel and secure the ends, looping them where appropriate. 
 
As I said, the mandrels have different levels ranging in size as follows-
Round- 12 levels ranging from 6.5mm to 27.5 mm diameter
Square- 12 levels ranging from 6.6mm to 25x25 mm
Oval- 12 levels ranging from 11x5mm to 29x23mm
Triangle- 10 levels ranging from 5x5x5mm to 31x31x31 mm
You can now make all the shaped jump rings, toggles, pendants, earrings and other jewelry items as well as decorative items for home accents and scrapbooking embellishments, altered art, etc. 
$5.99

31d9ze045tl__sl500_aa300_use.jpg

Beadsmith Rubber 4"x4" Bench Block~This is a non-skid, non marring surface that is excellent for flattening wire, chasing metal and securing parts for filing.  You can also use under a steel bench block to reduce noise and vibration from hammering.  It is made of a firm vulcanized rubber.  If you rubber stamp and have used the red rubber typically attached to wood mounted stamps- then you have used vulcanized rubber.  It measures 4"x4" and 1" thick.  From the Beadsmith-a supplier of professional tools and equipment.
$5.59

Need a wire jig to create even more interesting shapes from wire? Find it on this page link

benchbluse.jpg
Leather Bench Block Pad

Leather Bench Block Pad~This is a pad to help hold bench blocks & anvils in place while flattening wire, chasing metal and using punches.  It reduces noise and vibration from hammering.  It is constructed of suede (grey) with double stitched and glued edges.  It is filled with sand and measures 5.5" x 5.5".  The picture is a little fuzzy.  When scanning- if it isn't perfectly flat it grabs what is closest to the glass and blurs the rest.
$11.89

An assortment of different colored wires can be found on this page link

ctrpunchuse.jpg
Center Punch Set

Center Punch Square Head Set of 5~This set comes in 5 different sizes, 1/16", 5/64", 3/32", 9/64" and 5/32"  The square heads make it easy to hit with your hammer.  You would use these to start a hole in metal.  They don't make the hole, but when you want to drill a hole in metal, use these to make an indentation in the metal so your drill won't slip around on the metal- gives it a good starting point to drill.  Made of tool steel, hardened and tempered.  It has a knurled body for better grip and comes in a plastic pouch for storage.
$6.49

tweez1use.jpg

Jewelry Tweezers~ These measure approx. 3 1/4" in length and have a flat surface for gripping items.  I think they would work great if your are soldering your slides and need something to hold them (they get pretty hot).  You may have a different use for them in mind.  They are not spring loaded so you control the open and close function manually.
$1.89

Other info.........
~To saw from the inside or center of sheet metal-
1.  Start by drilling a tiny hole into the metal.  Get your Dremel or rotary tool or other drill out for this.  I love the flexible attachment you can add to the rotary or Dremel tool for drilling.
2.  Insert the blade (this is where you use the jewelry saw- you have to unhook the bottom of the blade-then insert it in the hole you drilled and tighten it back into the saw).  Then you can begin to saw out your design.  It helps to draw out the design first with a Sharpie.  When finished, loosen the bottom screw and release the saw blade.
 
 
4 Main Reasons Saw Blades will break~
1.  Saw blade was not inserted tight or taut enough.
2.  Saw blade is wrong size
3.  Saw is being turned too quickly inside the sheet metal
4.  The saw blade is being pushed through the metal rather than pulled up and down.  Let the saw work for you.  When I took the metal smithing class, I found sawing the metal to be very relaxing.  Don't hurry...just enjoy.
 
Lubricate your saw blade with beeswax or other lubricant. 
 

~Best Kept Metal Cleaner Secret~
My brother was visiting me, August 2014.  He's my favorite brother (my only brother) and like big brothers usually are, very smart and knowledgeable.  We were in Menards, which is a big box hardware store like Lowes or Home Depot.  So the aisle we were in had all different types of cleansing agents.  He pointed out one to me called Bar Keepers Friend.  I had told him earlier that day of a problem I had with some brass.  So he thought this would help.  The can says it is a cleanser and a polisher.  It is much like Comet cleanser only very fine.  When I tried it on the brass, I fell in love with this...a where have you been all my life!  kind of moment.  It is a wonderful metal cleaner.  A few days later- and this is so very weird- I was looking for a certain scrubby thing and I have those little compartments on the cabinets under sink that fall out to keep them in and I found a ring.  I thought it was long gone- we had a fire in 2004 and most of my jewelry was destroyed.  This was a favorite ring, sterling silver with 3 small stones in it.  It was so black and caked with soot that had been on there for 10 years.  Guess what......it looks like new now.  I used the Bar Keepers Friend, toothbrush and some muscle and got every bit of soot and discoloration off the ring.  Some spots I  used one of the fine grit sanding pads I carry, but I couldn't believe what a fantastic job it did.  The bad part is....my fingers are a little larger now and can't wear it.  So check out your favorite hardware store- maybe Walmart carries it, but it will be a treasured tool for your metal work.

Some other cool tools you may find useful:
Jewelers bench pin; ring clamp; metal shears or tin snips; hammers-so many neat ones; riveting hammer, rawhide or plastic mallet, chain nose pliers, flush cut pliers, Dremel or rotary drill; center punch-any hardware store will have these- very useful for metal work; dapping block; anvil. 
If you desire any of these tools and can't find them, I can order them in for you.  I may be adding some to this page in future too.

Metal 101~ From Mark Lareau's book, I learned the most interesting thing.  Understanding a little of the science behind the metal can help in your metal working technique.  When you work with metal, the more you work it or bend it or hammer it the harder it becomes (Work Hardened Metal).  The reason for this is that you are smashing the atoms in the molecules-aren't you just so impressed- well you hit them and they flatten out- they are shifting into a more tightly packed conglomeration so your metal becomes harder, stiffer and brittle.  At some point, if you don;t stop, they become so jam packed and there is no where else for them to go so the metal breaks.  Think of bending a spoon back and forth and how it finally breaks.  You smooshed the molecules as far as they could go so it can't stay together with the rest of the metal and it breaks.  Sounds like a relationship huh!
So how do you avoid breaking up......a process called annealing- which is heating the metal to a certain temperature for a certain a mount of time.  This time and temp is different for each kind of metal.  What happens is the molecules will get back to their regular shape, realigning themselves.  So then you can begin work hardening them again into the shape you want.  Now think of the ol' western movies where the town blacksmith is hard at work in his barn.  He holds that metal or horse shoe and whacks it and whacks it, then he puts it in the fire and heats it up again, takes it out, quenches or cools it in some water and he begins hammering and shaping it again.  It is all about those little molecule/atom thingies. 
 
Most of the time, I am working with metal just a short period of time so I can have fun and play with the metal and not have to worry about heating it (annealing) and major fuss.  I am a low maintenance kind of gal and like things quick and fairly easy.  Also, ignorance is often bliss. 

What metal?~You have a myriad of metal resources right in your home.  How about some tin cans, fancy tins-maybe you want to use the pretty graphic on the tin, candy tins, screws, gears, watch parts, old jewelry parts, keys, wire mesh, pop cans, etc. 
You can create your piece using these items or practice on these items before you invest in metal sheeting.  It is all there for the taking. 

rin8guse.jpg
Corrine Copper Insert in Patera Ring

I made this ring starting with the Patera Square Ring, then I took a piece of copper, used texture hammers to give it some roughness, added a little teal paint to the indentations in the metal and cut it to fit the square Patera ring using the Tim Holtz scissors- love them, they cut metal- and added some little bling beads and covered it with Ranger's Glossy Accents resin.   Just a simple technique with some cool tools. 

FYI~ Are your Solder Tips getting dark & oxidized??
One of my customers shared her saga with her soldering iron and I thought I would pass it along to you.  Hopefully, it can prevent someone from going thru this.
She had 2 soldering irons, a Radio Shack one and an Inlad 100 watt one.  The tips kept getting really dark and oxidized- she was using tip cleaner/tinner regularly and following all the directions.  She would solder a few pieces and then it would quit  taking solder on  her- quite frustrating to say the least.  She researched everything she could on taking care of your tips and this is what she found out.
The lead free solder melts at a much higer temperature than the solder containing lead and they are bad on tips.  One site specifically mentioned not to use the INLAND 100 Watt Irons with the lead free as she also was having customers complain about the same problem (tip dark and oxidized). 
The recommendation is that if you are using lead free solder or silver gleam, the Weller 100 watt iron is the best.  It ranges in price from $63-$75 depending on where you buy it. 
I hope this helps stave off a frustrating soldering problem for someone.

Some of the books I have enjoyed for metal smithing and have used as information for this page are:
 
~Getting Started Making Metal Jewelry by Mark Lareau
 
~Making Connections-A Handbook of Cold Joins for Jewelers & Mixed Media Artists by Susan Lenart Kazmer
 
Fun books~
Metal Craft Discovery Workshop by Linda & Opie O'Brien
Who's your Dada?-Redefining the Doll through Mixed Media by Linda & Opie O'Brien
 
Hardcore & Extensive Metal books~
Any book by author, Tim McCreight

copperncklaceuse.jpg
Corrine's Necklace Sample

This necklace was made several years ago.  The copper piece at the bottom was from a piece of thrift store jewelry and I roughed it up a bit more with a hammer and reshaped it.  The other part of the necklace was peyote bead stitched.  You can incorporate metal from many other places into your art project.  It doesn't need to be extremely technical or involved to have fun and to incorporate metals into your work with some simple tools.  Think about the metal tins found at yard sales & thrift stores, metal pop cans and tabs.


ATTN:  MAC Users & Ipod Phone Users~
For some reason Mac/Ipods & Paypal do not work well together.  For some Mac & Ipod users, the Paypal cart will dump after several things are added to the cart.  I might suggest you write the item numbers down that come up when you "add to cart".  If it does dump, you can call -740-477-1238 or email your order c_byers1@msn.com.  Sorry for the inconvenience.  I have notified Paypal of this problem, but so far it has not been fixed.
 
 
 
PLEASE make sure your Paypal ADDRESS is CORRECT before placing your order.  Thanks!  It also helps to have a correct email address if I need to contact you re your order.  Thanks.
 
~International Customers~
When checking out with Paypal, please add your phone number.  The United States Postal Service is requiring that for all international shipments now.
Thanks
ANY large dollar order~~
The shipping on every order goes up with the total of the sale.  Many of the things are small so the larger shipping is not warranted, so then I refund the difference.
If you have a question on shipping please contact me at

This does not apply to the standard shipping charge-just the larger orders when the shipping charge is at higher cost.
Articus Studio, 8341 Old Tarlton Pike, Stoutsville, Oh 43154, 740-477-1238